Hi Everyone,

I'd like to hear about your success stories and see a gallery of things working with DynoMotion.

What machines are using it. More YouTube videos.

Thanks,

-Lee

Hi Lee,
We have done a conversion on an Extron B6FC milling machine and it's a huge success, thanks to Tom's assistance and endless patience :)
I will post a video once the console is a little more presentable.
We now run Mach3, on a standard PC, through a Kanalog/Kflop interface to the Panasonic drivers and servos.
We have also attached a Keling MPG2.
I cannot rate his help highly enough.
Ross

--- In DynoMotion@yahoogroups.com, "studleylee" <indigo_red@...> wrote:
>
> Hi Everyone,
>
> I'd like to hear about your success stories and see a gallery of things working with DynoMotion.
>
> What machines are using it. More YouTube videos.
>
> Thanks,
>
> -Lee
>

Thanks Ross! I'd like to check them out. I have a Big oold Bridgeport SeriesII 4J head that I'm using mach alone with
now and would like to upgrade to serve using DynoMotion.
-Lee

On 5/18/2010 1:02 AM, fermanz wrote:

 

Hi Lee,
We have done a conversion on an Extron B6FC milling machine and it's a huge success, thanks to Tom's assistance and endless patience :)
I will post a video once the console is a little more presentable.
We now run Mach3, on a standard PC, through a Kanalog/Kflop interface to the Panasonic drivers and servos.
We have also attached a Keling MPG2.
I cannot rate his help highly enough.
Ross

--- In DynoMotion@yahoogroups.com, "studleylee" <indigo_red@...> wrote:
>
> Hi Everyone,
>
> I'd like to hear about your success stories and see a gallery of things working with DynoMotion.
>
> What machines are using it. More YouTube videos.
>
> Thanks,
>
> -Lee
>

__________ Information from ESET Smart Security, version of virus signature database 5125 (20100518) __________

The message was checked by ESET Smart Security.

http://www.eset.com